🇺🇸 Free shipping on us order of $79.99


Written by: Albert Brown,

Tuesday, March, 8, 2022

This really is the only way to split kindling. It's the ultimate tool that anyone can safely use. ——Lila R.

I'm saving money, my scribing becomes easier, and my tools and material are more precise and economical

I'm a single DIY'er and it was painful when I came across some irregular corners and had to deal with them.

"Oh, the shape is irregular. My materials are wasted again."

We always have difficulties in drawing irregular patterns and cutting materials.

Looking at the wasted material in my hand, I sighed. They cost me $60, and I had planned to make a beautiful bookshelf by hand. However, now they only become a pile of rotten wood.

I am annoyed and fed up with the waste of material due to unsuccessful cutting

I took the wasted materials in my hands. They were flatter now and looked terrible. It looked worse than every previous failure, and the jagged cuts on the edges looked like they had been bitten by a dog.

Why did this happen so often? I was fretful and tired of wasting money on cutting material unsuccessfully led to material waste. I made it my mission to figure out how to hand-drawn contours successfully. Here's what I found.

It's NOT about how you cut

As it turns out, it's not about how you cut the material. It's about how you draw it.

Before the material can be cut, we must draw the desired pattern. If this pattern is irregular, it will undoubtedly be difficult for the layman.

Much more than that. When you draw the pattern yourself, an imperfect irregular pattern can lead to difficult cutting or even failure. You will certainly be heartbroken when the cutting fails.

But such things may still happen, but there are ways to avoid them. How can we avoid bad things?

The Perfect solution with Saker Multi-function Scribing Tool

I read some about hand-drawn contours for getting rid of cutting failure. Some people say that only need to buy a long enough ruler and some irregular ruler to solve this problem. Unfortunately, I followed these suggestions but still didn't work.

It was at this time that a tool that I had never heard of appeared, It can perfectly draw the pattern you need. It's called Saker Multi-function Scribing Tool.

No difficulty in scribing and hand-drawn contours

The Saker Multi-function Scribing Tool has three steps. They are necessary.

The first step is to adjust the tool for the type of markings needed by adjusting the tightness of the pencil holder and the nut.

The second step is to lock the new shape into place for a stable marking.

The third step is to steady the tool and put the pencil where you need to mark and easily trace the lines you need.

No matter how irregular the pattern, you don't have to do tedious operations yourself, but only need to rely on this tool to complete.

A revolution on my way of hand-made

Saker Multi-function Scribing Tool has been a revolution on my way of hand-made. Last week, I used it to re-handcraft, and looking at my finished product I admired the perfection of my craft and Saker Multi-function Scribing Tool.

Saker Multi-function Scribing Tool has been a revolution on my way of hand-made. Last week, I used it to re-handcraft, and looking at my finished product, I admired the perfection of my craft and Saker Multi-function Scribing Tool.

I achieved professional precision in my woodworking for any type of fitting. The tool changes shape by a simple adjustment and locks into place for the most reliable scribing, especially for awkward and complicated edges. I didn't even sweat it with Saker!

Also, save material, money, and time

When you were preparing to make an item, did you find that the shape of this item is strange, and can you really draw patterns yourself perfectly? Or did you find that when you're done drawing a pattern, you need another tool to finish scribing the circle, etc.?

In such cases, the irregular patterns again become an obstacle to your hand-made. It may cause you to waste materials. And you need to spend more money to buy other tools. But no more. Saker Multi-function Scribing Tool can perfectly draw patterns without waste of materials and money.

I use Saker Multi-function Scribing Tool to determine the pattern. I use Saker Multi-function Scribing Tool to trace contours. I use Saker Multi-function Scribing Tool to successfully measure lengths, angles, and line segments.

It saves time because I draw contours, compass, and edge rules easily and I don't have to worry about it. It also saves a lot of money because no more material is wasted.

High-quality and Durable Materials

Saker Multi-function Scribing Tool is made of high quality with aluminum alloy, that surface is with anodic oxidation treatment, which could help to extend the service life of the product. High strength, corrosion-resistant, rustproof and durable.

When you use it, there is no need to worry about accidental scratches. Because its material is high-quality aluminum alloy, it is very safe.

A no-brainer investment

I started using Saker Multi-function Scribing Tool last month. As I said, I used to worry about drawing patterns, wasted a lot of materials, and wasted time and money. But the tool perfectly draws patterns without waste of materials.

In addition to meeting the basic functions perfectly, Saker Multi-function Scribing Tool can mark on woods, plastic, ceramics, metal, etc. Each pencil is equipped with 6 spare leads and a built-in sharpener. Its small size, light weight and the shirt belt clip design make it easy to carry and store. I can put it directly in my pocket.

I can't recommend Saker Multi-function Scribing Tool enough. If you care about saving money and scribing easier, then this Saker Multi-function Scribing Tool will be the best investment you make this year. Try it out, you won't regret it!

How can it be so affordable?

Did you know big brands spend BILLIONS on advertising, physical stores, and boss bonuses? Can you guess who's paying for that? Yep, us the customers...

The Saker Multi-function Scribing Tool spends nothing on any of this. They only sell online, don't advertise on TV and don't have greedy owners who demand ridiculous bonuses.

They prefer to let their devices and positive reviews do the talking for them!

Try Saker Multi-function Scribing Tool now and get the 35% discount

Now that you’ve discovered how unique, innovative this Saker Multi-function Scribing Tool can help you contour, scribe, and compasses totally mess-free, let me show you how easy it is to use it. All you need to do is to follow these 3 steps:

Saker is offering a 35% discount on the product while supplies last, so don’t wait too long. There’s no saying when this deal will end, so it’s a good idea to MAKE YOUR PURCHASE TODAY.

Saker wants to nudge you off the fence by giving you 35% OFF your order.
Check here to see if stock is still available>>

Here's What Satisfied Saker Customers Had To Say:

Don't take it from us:

Bobby T., Sequim, WA

"Highly recommend!"

"I come from 3 generations of carpenters in my family, and I’ve seen a ton of tools for handy work. Saker is by far the best quality I’ve ever used, and this scriber gets a dead on fit every single time. It helps me a lot! I highly recommend it."

James R., Worth, Texas

"Great tool"

"It would be great if every cut you had to make was on a straight line, but we all know that isn’t the case. The Saker scriber is the only tool I’ve ever found that does any scribing that could possibly be needed at a site. I’ve always gotten perfect edges with it, so I really can’t complain."

Carl F., Portland, Maine

"Fantastic and worth it"

"Saker scribers are non-negotiable on my work sites. They reduce errors and get the job done right the first time, every time, especially for difficult edges. The deep hole pencil is also a fantastic touch that I don’t think they advertise enough. I love what these guys have done with the scriber. Take it from me, these things are worth it."