Saker Contour Gauge Tool Has Become A Trend

Friday, August 06, 2020

Have you ever experienced this measurement problem during a home renovation project?

Perhaps you are remodeling your kitchen flooring from tile to laminate, or maybe you’re laying down new carpet in your bedroom.

Everything is going well as you take measurements along straight walls and make cuts to your flooring material. The perfect 90-degree angle of the first wall corner is no trouble at all.

But then you look up and see a corner with a very irregular angle coming up next.

As an inexperienced home renovator, you have no idea how to handle this. So, you give it your best attempt.

You take your measuring tape or ruler and try to twist and turn to get it to line up with the wall. But the wall corner has so many tiny divots and tricky corner angles.

This project just got a lot more difficult and now you’re getting a little frustrated.

You have no other choice but to try to draw the cut lines out on your brand-new laminate floorboards or carpeting. After some haphazard cutting, you take your piece of flooring into the space and try to line it up with the irregular corner.

It becomes very clear, very quickly that it doesn’t line up at all, which isn’t that surprising but is still very aggravating. What is surprising is that even after two more attempts, you still can’t get the precise measurements correct.

What’s worse is your new, expensive flooring material is now marked up and cut up, making it a total waste. Now what?

If you’ve ever been in this situation before, you know how frustrating it is.

You’ve wasted time and materials and you still don’t have a solution. Until now.

The Saker Contour Gauge Profile Tool is the instant solution to this DIY problem. This tool helps you measure every tricky corner angle to make sure every cut is correct.

Whether you’re working with laminate, engineered wood, solid wood, vinyl flooring, tile, carpet, auto metal sheet, or stainless steel, this is the tool for the job. In fact, you can use it for any type of project where you need to copy irregular shapes and contours in order to properly cut patterns.

What is the Saker Contour Gauge Profile Tool?

The Saker Contour Gauge Profile Tool consists of movable and lockable plastic pins that form to whatever shape they are pressed against. When the plastic pins are pushed against a curved or odd shape, they are formed into an instant template.

Now you can easily transfer precise curves and irregular shapes to your flooring material for the perfect cut.

The contour gauge is made of high-quality ABS plastic that is durable and rustproof.

The unique shape locks in place to solve measurement difficulties.

The tool is equipped with a locking mechanism that allows you to lock in whatever contour shape you’ve formed. That way when you go to trace the shape onto your material, the wave of plastic pins don’t move around and mess up the shape.

The long plastic pins make the tool work for any project.

Because of the long length of the plastic pins, the Saker Contour Gauge Profile Tool can be used around any object, no matter how wide or deep it is. You can press the contour gauge up against corners, molding, pipes, columns, door frames, circular frames, ducts, and more.

This tool turns frustrating into fun and expensive into economical.

Many customers have described using the Saker Contour Gauge Profile Tool Easy as painless, quick, and even fun!

Plus, customers love that this tool helps them save material which ends up saving them money.

Get your own Saker Contour Gauge Profile Tool now!

Get this tool BEFORE your next carpentry or woodworking project, or you’ll experience this frustration all over again.

Buy the Saker Contour Gauge Profile Tool to make measuring and cutting easy.

Get the Saker Contour Gauge Profile Tool now and start duplicating any shape instantly!

Check for Availability Here>>